Misinterpretation of liquid silicone rubber (LSR) based on public perception

Nov 16, 2022 Laisser un message

2

Misunderstanding 1: Silicone is a chemical element or component


The first silicone products that come to mind are often breast implants, lube, an ingredient in some cosmetics, and can even be confused with silicone. The reality is that silicones are a family of chemicals with different states (liquid, gel, solid). Specifically silicone rubbers, which are long molecules formed from silicon (Si) and oxygen (O), which can have different properties and be used in different applications depending on how they are arranged.


Misunderstanding 2: Silicone rubber is a synthetic material


Silicone rubber, including liquid silicone rubber, is synthetic in the sense that its synthesis was created by humans. However, the raw material is completely natural: sand or "silica" is formed from silicon and oxygen. In fact, humans have been using natural silicon materials in arrowheads and bowls for many years. Although silicon, silica, and silica gel are different, the confusion is understandable. To clarify: silicon is a chemical element; silicon dioxide is a type of silicon dioxide (sand) used in the production of materials in the silicone family.


Misunderstanding 3: Silicone rubber can only be processed and applied at high temperature


There are different types of silicones, such as room temperature vulcanizing (RTV) silicone rubbers that can be processed and applied at room temperature. If the application requires the use of liquid silicone rubber (LSR), it can be modified so that it can be molded and vulcanized at low temperatures. This is mainly used in electrical and electronic applications and in the making of silicone moulds.


Misunderstanding 4: Silicone rubber is very sticky


This myth has to do with the feel of silicone rubber. In general, people tend to think that all silicone rubbers are tacky, but this depends on processing and application needs. For example, in cable insulation or in medical applications where liquid silicone rubber is used, the surface of the part must be as smooth as possible without stickiness. Silicone rubber formulations can be modified to incorporate mica or to alter processing conditions.


Misunderstanding 5: Silicone rubber is soft and elastic


Shore hardness is a scale used to measure the hardness of silicone, for example, a rubber band has a Shore hardness of 25, while a roller or roller skate has a Shore hardness of 100. All silicones are generally considered to have a hardness of less than 40 Shore A, so they are considered to have low mechanical properties. However, this is not the case. There are many ways to increase the hardness of silicone rubber, such as creating more cross-links or adding fillers. For example, the Shore hardness of optical liquid silicone rubber is 70, which is almost inelastic.


Misunderstanding 6: Silicone rubber will produce a lot of smoke when it burns


Burning silicone rubber is believed to produce fumes and gases which are not good for some applications. In fact, silicone rubber is inherently self-extinguishing. According to the combination of silicone rubber, adding a flame retardant can completely eliminate the generation of gas and smoke, and meet the standard requirements.


Misunderstanding 7: Silicone rubber will cause air pollution


Chemicals causing environmental pollution are volatile organic compounds (VOCs) such as acetone, alcohols, methacrylates, acetates, etc. Chlorofluorocarbons (CFCs) have been determined to have an impact on the ozone layer. Due to their inorganic nature, silicone compounds or mixtures are free of these polluting chemicals.


Misunderstanding 8: Silicone rubber takes thousands of years to degrade


By the literal definition of biodegradable, silicone rubber is not biodegradable. However, under certain environmental conditions, the silicon-oxygen backbone can break down into water, silicic acid, and carbon dioxide. Sunlight and atmospheric oxygen produce low molecular weight silicone chains (cyclopentasiloxane). When they are buried, the soil minerals act as a catalyst, accelerating chain scission and degrading the silicone rubber in just a few days.


Misunderstanding 9: Silicone can cause allergies and irritation


Many studies have been done on this topic, and unlike other types of rubber (i.e. natural latex rubber), silicone rubber does not irritate the skin or produce an allergic reaction. In fact, the inherent biological inertness of silicones, including liquid silicone rubber, is an advantage.


Misunderstanding 10: Silicone rubber is bioaccumulative in the human body


Bioaccumulation is "the accumulation of toxic substances in the tissues of living organisms. This occurs when the rate of ingestion of a substance is greater than the rate of excretion or metabolic transformation of the substance". In extensive testing, silicone rubber has excellent compatibility with human tissue and body fluids compared to other elastomers, and exhibits minimal tissue reaction upon implantation. Odorless and tasteless, silicone does not support bacterial growth and will not stain or corrode other materials. They are generally formulated to comply with FDA, ISO, and tripartite guidelines for biocompatibility of medical products.


Misunderstanding 11: Silicone rubber can cause disease


Because many of the applications of silicone rubber come in contact with the human body or food, there are concerns that the material could cause disease. In terms of release of the molecules during application, they are too large to penetrate tissue. The US Food and Drug Administration (FDA) is very strict on materials that come into contact with humans and has been approved for use with consumables such as food and beverages, and food-safe silicone is also used in the cosmetic and pharmaceutical industries.


Envoyez demande

whatsapp

Téléphone

Messagerie

Enquête